The globally prestigious HVAC, water, and energy exhibition MCE Mostra Convegno Expocomfort 2026 brought together more than 150,000 professionals from around the world between March 24–27, 2026. At MCE 2026, EBITT, one of the leading companies in pump and fluid technologies, took its place within the special “Water Ambassador” program.

At the MCE Mostra Convegno Expocomfort exhibition, water became a central focus due to its vital importance for a sustainable future, through events organized under the theme of Smart Water (Usage). Companies pioneering the intelligent use of water—particularly those offering tangible solutions for the health of our buildings through water efficiency technologies and products—were brought together under the “Water Ambassador” title. The Milan Engineers Association supported these initiatives. Visitors seeking smart water solutions were directed to the Water Ambassadors. EBITT had the opportunity to showcase its approach centered on smart systems and integrated solutions in water management.

Throughout the exhibition, engineering-focused and system-based solutions were presented to visitors.

As part of the Water Ambassador program, EBITT introduced its smart booster solutions in a dedicated presentation. It was emphasized that water systems are no longer just equipment, but systems optimized through data and control. In the presentation titled “Smart Booster Solutions,” both Evolia was introduced and key smart booster solutions contributing to sustainability were discussed.

Highlighted Products and Solutions

Evolia
The star of the EBITT stand was Evolia, the company’s smart booster solution. With its integrated inverter structure and high-efficiency motor technology, Evolia attracted significant attention and appreciation. Its compact design and plug & play structure drew strong interest from visitors.

Containerised Fire Pump Stations
EBITT’s containerized fire pump systems stood out as an attractive solution for international projects, offering ready-to-use, integrated, and fast installation advantages.

GMA Series (Submersible Pumps)
The next-generation GMA submersible pump series was introduced to a broad audience for the first time at the exhibition. With its balance of compact structure and high performance, the EBITT GMA Series received strong appreciation.

Inline Technology Series
EBITT’s inline pump series, equipped with frequency inverter technology and IE5 high-efficiency motors, were positioned with a focus on energy efficiency and system optimization. These solutions received very high ratings from visitors. Energy efficiency is no longer a preference—it is a necessity. IE5 motor technology is one of the most critical components of this transformation.

Split Case Pump Solutions
EBITT’s split case solutions for high-flow applications stood out as one of the company’s strong product groups.

Containerized Fire Pump Systems
Containerized fire pump systems once again drew attention, particularly due to their advantages in fast installation and reliability in international projects.

Statements from EBITT Officials

Officials at the EBITT stand, which hosted intensive international meetings throughout the exhibition, commented:

“Today, we no longer consider water systems merely as pumps, but as an integrated whole that must be managed. As EBITT, we are bringing this transformation to the field. Smart booster systems not only generate pressure; they are evolving into structures that optimize energy consumption and manage the system internally. With Evolia, our goal is to change the conventional perception of booster systems. We offer a more compact, smarter, and more efficient solution. In projects, the demand is no longer for individual products but for integrated system solutions. As EBITT, we respond to this need on a global scale. We are proud of the strong interest our smart and efficient solutions receive in international markets. This reflects not only our strength and quality but also that of our country. Our success is also our country’s success.”

Water is one of the world’s most critical resources—and managing it efficiently, safely, and sustainably requires engineering that goes far beyond machinery. Our approach integrates advanced hydraulic science, system-level thinking, and continuous innovation to ensure that every drop moves with purpose and reliability.

1. Rethinking Water Preservation

We begin with a simple principle: preserving water starts long before it reaches the system. Through meticulous hydraulic calculations, flow modeling, pressure stabilization, and cavitation prevention, we design infrastructures that minimize loss and maximize usable output.

2. Engineering Systems, Not Components

A pump alone cannot guarantee efficiency. What matters is how every element—motor behavior, pipe geometry, control algorithms, pressure zones, and safety logic—interacts as one. Our engineers evaluate entire systems to ensure stability, performance, and long-term reliability.

3. Intelligent Use of Energy

Energy is the hidden cost of water movement. By applying advanced motor technologies, optimized duty points, variable-frequency control, and real-time consumption analysis, we transform water delivery into a low-energy, high-efficiency process.

4. Protection Through Engineering

Water can damage the very systems designed to move it if not properly controlled. Our engineers design safeguards such as dry-run protection, temperature management, fault prediction, redundancy logic, and emergency protocols to keep systems safe under every condition.

5. Engineering With Tomorrow in Mind

Sustainability is not a slogan—it is a design criterion. Every system we develop is created to reduce waste, extend service life, lower operational costs, and support responsible resource management.

Through this engineering philosophy, we turn water management into a smarter, safer, and more sustainable experience—today and for the future.

Ebitt Fluid Technologies offer a wide range of pump solutions that are suitable for water transfer, irrigation and fire fighting. Among these sets; booster, EN12845 approved, and UL approved sets have the spotlight. With customizable design, any demand is satisfied in an efficient and price friendly way. Around 20% of the global demand of electricity is consumed for pumps and Ebitt ensures the most energy saving solutions considering long-term usage. The pump that is going to be used in the set is selected according to its best efficiency point (BEP) so that the best pump performance can be obtained with lower energy consumption.

Booster Pumps

A booster set is expected to work for many hours every day. Ebitt presents a wide range of booster pumps that are suitable for every demand. Many applications such as cooling, irrigation, transfer, boostering, processing are suitable for Ebitt boosters. Some accessories such as variable frequency drives (VFDs) can also be applied depending on the demand.

Vertical Multi-Staged Pumps

Ebitt vertical booster pumps are mainly focused on relatively higher pressure operations. With their multi-staged design, the head pressure demand is satisfied at certain flow rates.

MVS Series:

MVS is a non self priming vertical multi-stage centrifugal pump with standard motor installed. The motor shaft is directly connected with the pump shaft through the pump head with a coupling. The pressure cylinder and flow passage components are fixed between the pump head and the water inlet and outlet section with bolts. The water inlet and outlet of the pump are in the same straight line at the pump bottom; The pump can be equipped with intelligent protector as required to effectively protect the pump from dry running, phasefailure, overload, etc. Ebitt MVS Series offer a maximum flow rate of 110 m³/h and a maximum head pressure of 250 mWC. All parts that contact with water are made of AISI304 stainless steel as standard and AISI316 stainless steel as optional.

MV Series:

Comparing to MVS Series, MV Series is similar but they are focused on lower head and flow. With a maximum head pressure of 130 mWC and a maximum flow rate of 10,5 m³/h, MV Series are best for smaller pump operations.

Horizontal End-Suction Multi-Staged Pumps

XHC Series:

All wet parts are made of AISI304 stainless steel as standard, AISI316 stainless steel as optional. Offered with both single-phase and three-phase electrical motors that start from 0,25 kW and up to 3 kW

EDX Series:

Monoblock design that is fully stainless steel with twin-impeller for high pressure ratings. Q_max  18 m³/h, H_max  75 mWC and motors are offered from 1,1 kW to 3,7 kW for EDX Series.

ECX Series:

Compact design as volute pump body that adopts liquid bulging technology. Horizontal, monoblock, single impeller design with threaded inlet and outlet connections that is fully made in AISI304 stainless steel as standard. AISI316 execution is on request. Q_max 26 m³/h and H_max 12 mWC with motors are offered from 0,37 kW to 1,85 kW.

Monoblock Centrifugal Pumps

WTM Series:

Single stage, long shaft monoblock design with flange type connections. Cast iron body, cast iron or stainless steel impeller. Q_max 400 m³/h, H_max 151 mWC with motors from 0,75 kW to 160 kW.

WTX Series:

Single stage, end-suction design with flange type connections. All wet parts are made of AISI316 stainless steel with special type mechanical sealing options. Q_max 200 m³/h, H_max 75 mWC with motors starting from 1,1 kW to 37 kW.

EN12845 Listed AUE, AUED Fire Sets

Constructed for automatic pressurization units to be used in fire hydrants and sprinkler installations. Units are composed of 1 main, 1 stand-by and 1 jockey pumps in order to sustain a system pressure level without having to start the main pump. The pumps start operating after a decrement in pressure value in the fire fighting system. The first pump to be triggered is the jockey. If the jockey cannot restore the pressure level, the main and stand-by pumps start in cascade sequence according to the pressure switches that are set at different pressure levels. The pressure switches of the main and stand-by pumps are used for automatic starting as the pumps must be stopped manually as per EN12845 standards. The replacable membrane type expansion tank with a capacity of 24 liters and 16 bar is mounted on the set in case of water hammer effect.

Horizontal, end-suction, single staged centrifugal pumps (Ebitt EL Series) are the pumps that are used as main and stand-by with customizability. Standard delivery execution is cast iron with mechanical sealing. Bronze execution and soft-gland packing are optionally used. Electric + Electric + Jockey or Electric + Diesel + Jockey installations are possible with flow rates starting from 6 m³/h to 1150 m³/h and pressure range is up to 185 mWC with EN12845 complying IP55 protection electrical motors.

UL+FM Approved Fire Pump Sets

Ebitt UL+FM Fire sets are constructed for automatic pressurization units to be used in fire hydrants, sprinklers and installations as Electric + Electric + Jockey or Electric + Diesel + Jockey. Flows from 50 GPM to 3000 GPM and pressures from 71 psi to 304 psi are possible. The fire pump sets are mounted or aligned on a common base plate. The fire pump package includes all accessories such as casign relief valve, automatic air release valve and manometers to be supplied with approved electric and/or diesel fire pump controller. End-suction or double-suction split-cased centrifugal pumps are used as per NFPA20, UL Listed electrical motors, UL/FM Listed diesel engines and UL/FM approved controllers are used with complying accessories.

Ebitt UL approved fire pumps are ideally developed and produced either for small flows or high flows through well-designed compact packages. Ebitt N Series end-suction pumps are used with their easy maintenance, self-venting center line discharge and low NPSH requirements. The pump execution is ductile iron body, bronze fitted with packing. The shaft and sleeves are AISI316 stainless steel and supported by thrust ball bearings and radial roller bearing. Ebitt SCP Series double-suction split-cased pumps are in-line designed, space saving, easy maintenance horizontal type. They are heavy duty designed with replacable wear rings and sleeves. Bearings are mounted and can be replaced without opening the pump case. Each stuffing box is fitted with bronze gland and with a stuffing box extension to facilitate the packaging rings removal. The pump construction is ductile iron body, bronze fitted with packaging. The shaft and sleeves are AISI316 stainless steel and they are supported by heavy duty ball bearings and roller bearing.

Ebitt Fluid Technologies is actively expanding its international distributor network.
If you are interested in representing a globally certified and trusted fire pump brand,
please contact us at [email protected].